Press 
or 
multiple times to scroll through days, hours, minutes, etc.
If you don't set the clock within two minutes, the system returns to standby.
Setting up your answering system Turning the answering system on/off
1 To turn the answering system on, press answer on/off . A beep tone will sound after the press, greeting message is played.
2 To turn the answering system off, press answer on/off again.
The EXLA 8950 announces that the answering system turned off.
Setting the clock
The clock on EXLA 8950 Answer System starts when power is applied to the base. Follow these steps to set the clock to the correct time.
1 Press and hold clock until a beep tone sounds.
2 First, press 
or 
until the correct day of the week is announced. (Number zero through six displays on the base as each day is announced.) Press clock again to select the day.
3 Next, press 
or 
until you hear the correct hour setting. Numbers 1 through 12 display on the base as each hour is announced. Press clock again to select the correct time.
4 Press 
or 
until you hear the correct time setting. Numbers 1 through 59 display on the base as each minute is announced. Press clock again to select the correct time.
5 The LED displays an A or P. Press 
or 
until you hear the correct AM/PM setting.
6 Press clock again to end the time/day setting. | 26 |
The EXLA 8950 announces the time that you have set. |