Uniden EXLA8950 Selecting the message record time, Selecting a PIN code, » Announce only feature

Page 31

Selecting the message record time

You can set your answering system to record messages up to one or four minutes long.

One minute option: move the REC TIME switch to 1.

Four minutes option:

move the REC TIMEREC TIME

switch to 4.

ANN/4/1

Press or multiple times to scroll through numbers on the display.

»Announce only feature:

The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.

The message counter LED displays “ ” when system is on standby.

Prerecorded outgoing message for Announce only feature is:

"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps.

1 On the base, press and hold pin button until a beep sounds, and the LED displays 00.

2 To set the first number, press

or to scroll from 00 to 90. When the desired number appears in the display, press pin . This selects the first number.

3 To set the second number, press

or to scroll from 0 to 9. When the desired number appears in the display, press pin . This selects the second number and then the entered number is announced.

28

Image 31

Contents Page Introduction FeaturesTalk Long Dst Controls and functions45 46 47 Contents Base unit Read this firstHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsFrom the handset Making a callOther Operations Sign up and Registration Placing a call using LDMLDM Long Distance Manager LDM call from the handsetDo not USE Private Branch Exchange PBX dialingHandset on the base Receiving a callFrom the handset From the baseHandset ringer switch Adjusting the ringer and earpiece volumeRedialing a call Using the speakerphoneMute When speaking on the handsetRinger mute On the handset Storing phone numbersMaking calls with memory dialing Erasing a stored phone number When the handset is off the base When speaking on the baseWay conferencing Intercom from the base to handset To transfer from the handset to the base Transferring a callTo transfer from the base to the handset Integrated answering device IntegrateddeviceansweringSetting the clock » Choosing between two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message GreetingSelecting the message record time » Announce only featureSelecting a PIN code Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitW, X, Y, Z Index