Uniden EXLA8950 manual Maintenance, Battery replacement and handling

Page 41

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year. Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

38

Image 41

Contents Page Introduction FeaturesTalk Long Dst Controls and functions45 46 47 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsOther Operations Making a callFrom the handset LDM Long Distance Manager Placing a call using LDMLDM call from the handset Sign up and RegistrationDo not USE Private Branch Exchange PBX dialingFrom the handset Receiving a callFrom the base Handset on the baseHandset ringer switch Adjusting the ringer and earpiece volumeRedialing a call Using the speakerphoneRinger mute When speaking on the handsetMute On the handset Storing phone numbersMaking calls with memory dialing Erasing a stored phone number Way conferencing When speaking on the baseWhen the handset is off the base Intercom from the base to handset To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrated answering device IntegrateddeviceansweringSetting the clock » Preset Message Setting your greeting» Recording your personal outgoing message Greeting » Choosing between two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a messageVoice memo Deleting a message» Deleting individual message » Deleting all messagesRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion General SpecificationsBase unit HandsetW, X, Y, Z Index