Uniden EXI 8965 owner manual Step, Preparing the battery pack

Page 11

Step 3

Preparing the battery pack

Charge the battery pack for more than 12-15 hours before you start using your phone.

1 Press and slide the battery compart- ment cover toward the bottom of the unit.

2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.

Black

Red

3 Securely close the battery compart- ment cover by sliding it up until it snaps into place.

4 Place the handset on the base unit with the keys and display facing upward.

status lamp

This position lets you see Caller ID messages on the display.

Total:00

When the handset has been properly placed on the charging terminals of the base unit, the “status” lamp of the base unit lights and charging begins. Charge the battery for at least 12-15 hours.

You can place either side up for charg- ing the battery.

8

Image 11

Contents

EXI Introduction FeaturesTalk Flash Controls and functions43 44 45 Table of contents About the digital security code Read this first5 to 8 to9Step Checking the package contents Choose the best location Setting up the base unitConnect the base unit Tips Choose the dialing modePreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Beep sounds and the displayed area code is entered Entering your area codeOn-hook dialing Making callsMaking a call with the handset Off-hook dialing Making a call with the base On-hook redialing Redialing a call with the handsetOff-hook redialing Redialing a call with the baseReceiving calls Auto Talk when ringingAny key Talk when ringing Mute when ringingHandset ringer tone Handset ringer switchHandset ear speaker volume Receiving a call with the base Base ringer switchBase speaker volume With the handset Memory storingStoring phone numbers and names Use With the base With the handset On-hook dialing Memory dialingDisplay a Programmed Number Standard dialing With the base One touch dialingEditing a stored name and/or phone number Memory editingMemory01 Stored Erasing a stored name and phone number Memory erasingWith the base Mute When speaking with the baseWhen speaking with the handset When phone is ringingWay conference Way conference featuresWhen speaking on the handset When speaking on the basePaging from the handset to base Intercom featureUsing your EXI 8965 intercom Paging from the base to handsetTo transfer from the base to the handset Call transfer featureTransferring a call To transfer from the handset to the baseUsing the speakerphone Speakerphone featureCaller ID Caller ID serviceSetting the Caller ID options Here are some typical displays When the telephone ringsViewing the Caller ID Message list Long Distance call settings and cancellationDeleting a Caller ID message Deleting information from the Caller ID listDeleting all Caller ID name/numbers Dial edit Using the Caller ID listCalling a party from the Caller ID list Long Distance callsStoring Caller ID messages in Memory dialing Using Caller ID with call waiting service Changing the digital security code Additional informationStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Symptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitW, X, Y, Z IndexK, L Page Uniden America Corporation