Uniden EXI 8965 owner manual Direct wall plate mounting

Page 47

Additional information (continued)

7 On the base unit, pull the handset retainer out of the slot.

8 Flip the retainer over and slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place,

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

3/16 in.

3-15/16 in.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 8 on page 43 to mount the telephone.

44

Image 47

Contents

EXI Introduction FeaturesTalk Flash Controls and functions43 44 45 Table of contents About the digital security code Read this first5 to 8 to9Step Checking the package contentsChoose the best location Setting up the base unitConnect the base unit Tips Choose the dialing modePreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Beep sounds and the displayed area code is entered Entering your area codeOn-hook dialing Making callsMaking a call with the handset Off-hook dialing Making a call with the base On-hook redialing Redialing a call with the handsetOff-hook redialing Redialing a call with the baseReceiving calls Auto Talk when ringingAny key Talk when ringing Mute when ringingHandset ringer tone Handset ringer switchHandset ear speaker volume Receiving a call with the base Base ringer switchBase speaker volume With the handset Memory storingStoring phone numbers and names Use With the base With the handset On-hook dialing Memory dialingDisplay a Programmed Number Standard dialing With the base One touch dialingEditing a stored name and/or phone number Memory editingMemory01 Stored Erasing a stored name and phone number Memory erasingWith the base Mute When speaking with the baseWhen speaking with the handset When phone is ringingWay conference Way conference featuresWhen speaking on the handset When speaking on the basePaging from the handset to base Intercom featureUsing your EXI 8965 intercom Paging from the base to handsetTo transfer from the base to the handset Call transfer featureTransferring a call To transfer from the handset to the baseUsing the speakerphone Speakerphone featureCaller ID Caller ID serviceSetting the Caller ID options Here are some typical displays When the telephone ringsViewing the Caller ID Message list Long Distance call settings and cancellationDeleting a Caller ID message Deleting information from the Caller ID listDeleting all Caller ID name/numbers Dial edit Using the Caller ID listCalling a party from the Caller ID list Long Distance callsStoring Caller ID messages in Memory dialing Using Caller ID with call waiting service Changing the digital security code Additional informationStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Symptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitW, X, Y, Z IndexK, L Page Uniden America Corporation