Uniden EXI 8965 owner manual Maintenance, Battery replacement and handling, Power Failure

Page 49

Additional information (continued)

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

RECYCLING NICKEL-CADMIUM BATTERIES

NICKEL-CADMIUM

BATTERIES MUST BE

DISPOSED OF

PROPERLY.

Ni-Cd

Nickel-cadmium cells are used in the bat- tery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel-cadmium batteries.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral deter- gent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

46

Image 49

Contents EXI Introduction FeaturesTalk Flash Controls and functions43 44 45 Table of contents 5 to Read this first8 to9 About the digital security codeStep Checking the package contentsChoose the best location Setting up the base unitConnect the base unit Tips Choose the dialing modePreparing the battery pack When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Beep sounds and the displayed area code is entered Entering your area codeMaking a call with the handset Making callsOn-hook dialing Off-hook dialing Making a call with the base On-hook redialing Redialing a call with the handsetOff-hook redialing Redialing a call with the baseAny key Talk when ringing Auto Talk when ringingMute when ringing Receiving callsHandset ear speaker volume Handset ringer switchHandset ringer tone Base speaker volume Base ringer switchReceiving a call with the base Storing phone numbers and names Memory storingWith the handset Use With the base With the handset On-hook dialing Memory dialingDisplay a Programmed Number Standard dialing With the base One touch dialingEditing a stored name and/or phone number Memory editingMemory01 Stored Erasing a stored name and phone number Memory erasingWith the base When speaking with the handset When speaking with the baseWhen phone is ringing MuteWhen speaking on the handset Way conference featuresWhen speaking on the base Way conferenceUsing your EXI 8965 intercom Intercom featurePaging from the base to handset Paging from the handset to baseTransferring a call Call transfer featureTo transfer from the handset to the base To transfer from the base to the handsetUsing the speakerphone Speakerphone featureSetting the Caller ID options Caller ID serviceCaller ID Here are some typical displays When the telephone ringsViewing the Caller ID Message list Long Distance call settings and cancellationDeleting a Caller ID message Deleting information from the Caller ID listDeleting all Caller ID name/numbers Calling a party from the Caller ID list Using the Caller ID listLong Distance calls Dial editStoring Caller ID messages in Memory dialing Using Caller ID with call waiting service Changing the digital security code Additional informationStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenancePower Failure Symptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetK, L IndexW, X, Y, Z Page Uniden America Corporation