Uniden EXI 8965 owner manual Making calls, Making a call with the handset, On-hook dialing

Making calls

Making a call with the handset

[On-hook dialing]

1 Pick up the handset and dial the

			phone number. (Phone numbers can
			be up to 32 digits.)
			Example: Enter 8178583300
					￿
			8178583300￿
		2 Press talk		. “Talk” flashes on the
¥￿			display.	Talk￿
			8178583300￿
»￿
			Then the volume setting is displayed.
			Example:		Talk￿
			High setting		<High>
*/tone/0		3 The number is dialed. After about 5
redial/p	select/ch		seconds, the call-time display appears.
			Talk		0:00￿
			8178583300￿
4 Press talk or place the handset on the base					5:15￿
to end the telephone call. The call-time displays
for about 5 seconds.
Other Operations
To		Do this
To improve reception		Press	select/ch .
To adjust the ear speaker volume		Press ¥￿or »￿.
To temporarily switch to tone dial		Press	*/tone/0 . The following numbers
(When base is set to pulse mode.)		dialed will be sent as tone dialing.
To enter a pause within the numbers dialed		Press	redial/p .

Notes

• If you enter a wrong number at the step 1, you can edit the number by del , and move the cursor by */tone/0 or #/ 1 .

•If there is no key entry for more than 20 seconds, the dialing operation is canceled and the telephone returns to the standby mode.

• The phone number can be changed before pressing talk .

11