Uniden EXI 8965 owner manual Setting up the base unit, Choose the best location

Page 8

Step 2

Setting up the base unit

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERA- TIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Choose a central location

Avoid personal computers

Avoid other cordless telephones

•You should charge your handset for more than 12-15 hours before using the phone.

•The location should be close to both a phone jack and a continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

•If your second phone line has a separate jack, place your phone so you can access both jacks.

5

Image 8

Contents EXI Features IntroductionControls and functions Talk Flash43 44 45 Table of contents Read this first 5 to8 to9 About the digital security codeChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Entering your area code Beep sounds and the displayed area code is enteredOn-hook dialing Making callsMaking a call with the handset Off-hook dialing Making a call with the base Redialing a call with the handset On-hook redialingRedialing a call with the base Off-hook redialingAuto Talk when ringing Any key Talk when ringingMute when ringing Receiving callsHandset ringer tone Handset ringer switchHandset ear speaker volume Receiving a call with the base Base ringer switchBase speaker volume With the handset Memory storingStoring phone numbers and names Use With the base Memory dialing With the handset On-hook dialingDisplay a Programmed Number With the base One touch dialing Standard dialingMemory editing Editing a stored name and/or phone numberMemory01 Stored Memory erasing Erasing a stored name and phone numberWith the base When speaking with the base When speaking with the handsetWhen phone is ringing MuteWay conference features When speaking on the handsetWhen speaking on the base Way conferenceIntercom feature Using your EXI 8965 intercomPaging from the base to handset Paging from the handset to baseCall transfer feature Transferring a callTo transfer from the handset to the base To transfer from the base to the handsetSpeakerphone feature Using the speakerphoneCaller ID Caller ID serviceSetting the Caller ID options When the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Dial editStoring Caller ID messages in Memory dialing Using Caller ID with call waiting service Additional information Changing the digital security codeMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetW, X, Y, Z IndexK, L Page Uniden America Corporation