Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 10 names/numbers in the handset.
•In memory dialing operation, you must press a key within 30 seconds. Otherwise, an error tone will sound and the phone will return to standby.
If you return the handset to the base, the phone will return to standby also.
•You have 30 seconds after pressing mem to enter the number you wish to store. Otherwise, an error tone will sound.
1) Press and hold mem until “Memory Store” is displayed.
2) Press the vol/ring/ 
or the vol/ring/ 
key, or enter
a number (0 - 9) to select the memory location where you would like to store the number.
3)Press select. The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select “Go Back” to choose another location.
4)To enter a name (up to 14 characters), use number keys.
•See the “Steps for Entering Names and Special Characters”. (See page 20)
• Use #/ 
and */tone/ 
to move the cursor to the desired location.
• Use delete/channel to delete characters as needed.
• Press and hold delete/channel to delete all the characters.
• If a name is not required, go to step 5.
5) Press select. “Store Number” is displayed.
The cursor flashes indicating that the display is ready for the number to be entered.
Memory Store
1
2
Store Name
Edit Memory 1
Delete Memory 1
Go Back
Store Number
[ 18 ] M E M O R Y D I A L I N G | www.uniden.com |