•You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.
•The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your messages, press # then 2 again within 15 seconds.
Command | Function |
| |
0 | then 1 | Repeat a Message | |
|
|
|
|
0 | then 2 | Playing Incoming Messages |
|
0 | then 3 | Skipping a Message |
|
0 | then 4 | Deleting a Message | |
|
|
| |
0 | then 5 | Stop Operation |
|
|
|
|
|
0 | then 6 | Answering System On | |
|
|
|
|
0 | then 7 | Memo Record/Stop* | |
|
|
|
|
0 | then 8 | Greeting Message Record/Stop* | |
|
|
|
|
0 | then 9 | Answer System Off | |
|
|
|
|
1 | then 0 | Help Guidance |
*For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again.
5)After all of the Help Guidance prompts have played, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart.
6)When you are finished, hang up to exit the system. The answering system automatically returns to standby.
[ 42 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E | www.uniden.com |