Uniden EXS 9965 manual Direct wall plate mounting

Page 10

8

tDirect wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

lAvoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

lTry to mount your phone within 10-15 feet of a working phone jack to avoid excessive cord lengths.

lMake sure the wall material is capable of supporting the weight of the base and handset.

lUse #10 screws (minimum length of 1 3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1. Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2. Refer to steps 1 through 9 on page 6 and 7 to mount the telephone.

Image 10

Contents R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Volume Controls To attach the beltclip Installing the BeltclipTo remove the beltclip To reset the digital security code Headset InstallationAutomatic Digital Code Security Making and Receiving Calls Basic 2-line operationWhen you finish the call, press line 1 to hang up Answering a Call from the BaseMaking a Call from the Base Dialing from talk modeMaking a Call from the Handset Dialing from standby mode Using the Tone FeatureFlash To redial from the handset Using RedialPlacing a Call on Hold To redial from the baseUsing the page Feature Using the Mute FeatureYou can hear the party on line 1, but they cannot hear you Line Operation Extension In UseWAY Conferencing Press on the handset to answer Using Your EXS 9965 Intercom From the Base to the HandsetTransferring a Call From Handset to BaseTraveling OUT-OF-RANGE On the Handset Key deletes characters as the cursor moves leftWhen entering numbers, you may press redial/p On the BaseEditing a Phone Number in Memory Press to erase up unwanted characters Erasing a Number from Memory From the HandsetFrom the Base Using Memory Dialing Standby mode Dialing from the HandsetTalk mode Dialing from the Handset Dialing from the BaseTroubleshooting Quick Reference ChartBase Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU