Uniden EXS 9965 manual Headset Installation, Automatic Digital Code Security

Page 16

Use only the Uniden HS910 headset specifically designed for Spread Spectrum phones. You may hear a buzz or hum on other headsets.

Keep the headset wire away from handset and base antennas.

14

HEADSET INSTALLATION

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, simply plug the headset plug into the headset jack. Your phone is ready for hands-free conversation.

If you are using an optional headset, you must still use the handset keypad for phone operations.

AUTOMATIC DIGITAL CODE SECURITY

To prevent other parties from making unauthorized calls on your phone line, a digital code was added to the EXS 9965. Your phone’s handset and base share this code. If the phone experiences a power

failure,	you must reset the digital security code by placing the
handset in the base .

To reset the digital security code

1. Remove the handset from the base, hold down page/int'com and you will hear the beep.

2. Put handset back to the base holding page/int'com.

The page stops.

3.Wait for 5 seconds. The status LED flashes to indicate that the digital security code is reset.

Image 16

Contents R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Volume Controls To attach the beltclip Installing the BeltclipTo remove the beltclip To reset the digital security code Headset InstallationAutomatic Digital Code Security Making and Receiving Calls Basic 2-line operationWhen you finish the call, press line 1 to hang up Answering a Call from the BaseMaking a Call from the Base Dialing from talk modeMaking a Call from the Handset Dialing from standby mode Using the Tone FeatureFlash Using Redial Placing a Call on HoldTo redial from the handset To redial from the baseUsing the page Feature Using the Mute FeatureYou can hear the party on line 1, but they cannot hear you Line Operation Extension In UseWAY Conferencing Press on the handset to answer Using Your EXS 9965 Intercom From the Base to the HandsetTransferring a Call From Handset to BaseTraveling OUT-OF-RANGE On the Handset Key deletes characters as the cursor moves leftWhen entering numbers, you may press redial/p On the BaseEditing a Phone Number in Memory Press to erase up unwanted characters Erasing a Number from Memory From the HandsetFrom the Base Using Memory Dialing Standby mode Dialing from the HandsetTalk mode Dialing from the Handset Dialing from the BaseTroubleshooting Quick Reference ChartBase Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU