Uniden EXS 9965 manual Using the Tone Feature, Flash, Dialing from standby mode

Page 20

The tone feature applies only when the base is set to pulse.

The flash feature does not function when line 1 and line 2 are on a conference call. (See the 3-WAY CONFERENC- ING and 4-WAY CONFERENCING, pages 22 and 23.)

18

Dialing - from standby mode

1.Pick up the handset.

2.Dial the number on the keypad, or use one of the memory features. (See USING MEMORY DIALING, page 33).

3.Press line 1.

4.When you finish the call, press line 1, or return the handset to the base.

USING THE TONE FEATURE

If you are dialing in the pulse mode

and need to enter tone digits, press tone then enter the digits. Once the call has ended, tone mode is canceled and pulse dialing resumes.

FLASH

If you have Call Waiting service and a call waiting tone sounds, press flash to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash again. The flash function on the base and handset are independent of each other. You can use your flash feature from either the handset or the base.

Image 20

Contents R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch Adjusting the Volume Controls To remove the beltclip Installing the BeltclipTo attach the beltclip Automatic Digital Code Security Headset InstallationTo reset the digital security code Making and Receiving Calls Basic 2-line operationWhen you finish the call, press line 1 to hang up Answering a Call from the BaseMaking a Call from the Handset Dialing from talk modeMaking a Call from the Base Flash Using the Tone FeatureDialing from standby mode Using Redial Placing a Call on HoldTo redial from the handset To redial from the baseYou can hear the party on line 1, but they cannot hear you Using the Mute FeatureUsing the page Feature Line Operation Extension In UseWAY Conferencing Press on the handset to answer Using Your EXS 9965 Intercom From the Base to the HandsetTransferring a Call From Handset to BaseTraveling OUT-OF-RANGE On the Handset Key deletes characters as the cursor moves leftWhen entering numbers, you may press redial/p On the BaseEditing a Phone Number in Memory Press to erase up unwanted characters Erasing a Number from Memory From the HandsetFrom the Base Using Memory Dialing Standby mode Dialing from the HandsetTalk mode Dialing from the Handset Dialing from the BaseTroubleshooting Quick Reference ChartHandset GeneralBase Unit At Uniden, we’ll take care of you Thank YOU