Uniden EXS 9965 manual Charging the Battery Pack, Initial battery charging

Page 12

Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden Parts Department at (800) 554-3988. Hours are from 8:30 a.m. to 5:00 p.m. Central Standard Time, Monday through Friday.

10

CHARGING THE BATTERY PACK

Initial battery charging

Before connecting your phone for the first time, charge the rechargeable battery pack for 15-20 hours without interruption.

1. Place the handset on the base.

2. Make sure that status LED lights.

If the LED doesn’t light, be sure the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

Charging optional battery packs

The base of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. You can obtain an

extra battery pack from your authorized Uniden dealer.

1. Pull the cover of the battery charger.

2. Put the battery pack in the compartment with contacts facing down.

3. Replace the charge cover.

4.Charge the battery for 24 hours. When charging is complete, lift the latch to remove the battery pack. To install the charged battery into the handset, see INSTALLING THE HANDSET BATTERY PACK, page 9.

In the event of a power failure, your spare battery pack temporarily provides power for the base so you can still use your phone.

Status LED blinks red when the base is powered by the spare battery.

Image 12

Contents R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator Adjusting the Volume Controls Installing the Beltclip To attach the beltclipTo remove the beltclip Headset Installation To reset the digital security codeAutomatic Digital Code Security Making and Receiving Calls Basic 2-line operationWhen you finish the call, press line 1 to hang up Answering a Call from the BaseDialing from talk mode Making a Call from the BaseMaking a Call from the Handset Using the Tone Feature Dialing from standby modeFlash Using Redial Placing a Call on HoldTo redial from the handset To redial from the baseUsing the Mute Feature Using the page FeatureYou can hear the party on line 1, but they cannot hear you Line Operation Extension In UseWAY Conferencing Press on the handset to answer Using Your EXS 9965 Intercom From the Base to the HandsetTransferring a Call From Handset to BaseTraveling OUT-OF-RANGE On the Handset Key deletes characters as the cursor moves leftWhen entering numbers, you may press redial/p On the BaseEditing a Phone Number in Memory Press to erase up unwanted characters Erasing a Number from Memory From the HandsetFrom the Base Using Memory Dialing Standby mode Dialing from the HandsetTalk mode Dialing from the Handset Dialing from the BaseTroubleshooting Quick Reference ChartGeneral Base UnitHandset At Uniden, we’ll take care of you Thank YOU