Uniden EXS 9965 manual Wall Installation, Standard wall plate mounting

Page 8

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

DO NOT use an outlet controlled by a wall switch.

6

WALL INSTALLATION

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1 Snap the wall mount adapter into the notches on the base.

2. Plug the telephone line cord to the TEL LINE 1/2 jack and the AC adapter to the DC IN 10V jack.

3. Plug the telephone line cord into the telephone outlet.

4. Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.

5. Plug the AC adapter into a standard

120V AC wall outlet.

6. Raise the antenna to a vertical position.

7. Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

Image 8

Contents R E a D Spectrum Controls and Functions Contents Features Welcome Included in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch Adjusting the Volume Controls To remove the beltclip Installing the BeltclipTo attach the beltclip Automatic Digital Code Security Headset InstallationTo reset the digital security code Making and Receiving Calls Basic 2-line operationWhen you finish the call, press line 1 to hang up Answering a Call from the BaseMaking a Call from the Handset Dialing from talk modeMaking a Call from the Base Flash Using the Tone FeatureDialing from standby mode Using Redial Placing a Call on HoldTo redial from the handset To redial from the baseYou can hear the party on line 1, but they cannot hear you Using the Mute FeatureUsing the page Feature Line Operation Extension In UseWAY Conferencing Press on the handset to answer Using Your EXS 9965 Intercom From the Base to the HandsetTransferring a Call From Handset to BaseTraveling OUT-OF-RANGE On the Handset Key deletes characters as the cursor moves leftWhen entering numbers, you may press redial/p On the BaseEditing a Phone Number in Memory Press to erase up unwanted characters Erasing a Number from Memory From the HandsetFrom the Base Using Memory Dialing Standby mode Dialing from the HandsetTalk mode Dialing from the Handset Dialing from the BaseTroubleshooting Quick Reference ChartHandset GeneralBase Unit At Uniden, we’ll take care of you Thank YOU