Uniden EXS 2080 manual Standard wall plate mounting

Page 11

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

2 - 7

1 Snap the wall mount adapter into the notches on the base.

2 Plug the telephone line cord to the

TEL LINE jack and the AC adapter to the DC IN 9V jack.

3 Plug the telephone line cord into the telephone outlet.

4 Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.

5 Plug the AC adapter into a standard

120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

Image 11

Contents Page Introduction to Your NEW Phone 32 33 34 35 45 46 47 Basics Way Conference FeaturesCaller ID Features Getting StartedHandset Next, choose the best location to set up the base unitBase unit 800 Hours M-F 830 AM to 500 PM CST Uniden Parts DepartmentChoose the best location Connect the base unit If you want to install the base unit on the wall, seePulse Choose the dialing modeIf your dialing system is Set the switch to Tone Contact your telephone company for AssistanceStandard wall plate mounting Direct wall plate mounting Contacts With the base chargingDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the charging contactsOther Operations Dialing from Standby ModeExample Talk 017 Dialing from Talk ModeTalk High Dial the phone number Example Enter11535 From the handsetIncoming Call Talk 000 NormalFrom the base This switch turns the handset ringer on or off Handset ringer tone and volumeRedial2 Redialing from Standby ModeLast three phone numbers dialed can be quickly redialed Redial1 RecentTalk Talk High Redialing from Talk ModePress talk Talk appears on the display When phone is ringing When speaking on the handsetDelete Memory07 Memory StoreStore Name Edit Memory07Memory07 Stored Is displayed Press mem To return to standby modeStore Number Store Number isPress mem Handset displays your programmed memory locations Memory dialing from Standby ModeTalk 035 Memory dialing from Talk ModePress talk Talk and the volume setting appears Uniden Corp John DOE Memory Store is Memory01 StoredDelete Memory02? Edit Memory02 Delete Memory02 Go BackEdit Memory02 Down to Delete Memory Delete Memory02When speaking on the base When speaking on the handsetAuto Talk and Cidcw Setting Caller ID optionsAuto TalkOff Area CodeAs 2 Data errors appear11 1230PM Here are some typical displays17 1230PM New Total02Press ª to display the latest caller ID message Delete Message? Yes When the pointer is at NoDeleting a Caller ID message Total00 When the pointer is at YesDeleting all Caller ID name/numbers Delete All? YesDisplayed phone number dials automatically Calling a party from the Caller ID listPress talk ªTalkSelect Location Storing Caller ID messages in Memory dialing1230PM To return to the first caller, press flash again Integrated Repeatedly until you Turning the answering system on/offPress and hold clock Until a tone Sounds First, press skip Next, press skipRepeatedly until you hear Press skipTone sounds and your message plays back on the phone Setting your greetingPreset Message Recording a personal outgoing message GreetingSelecting a PIN code Switch toAnnounce only feature Selecting the message record timeSetting ring time switch Playing your messages Skipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Additional Information To remove the beltclip To attach the beltclipWhen the charging terminals become dirty Battery replacement and handlingWhen slightly dirty When very dirtyStatus LED wont Make sure the AC adapter is plugged Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you W, X, Y, Z Digital security code Earpiece volume Headset installationK, L