Uniden EXS 2080 manual Direct wall plate mounting

Page 12

If you have wall mounted the base, you must remove the beltclip to charge the handset facing forward.

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is

up and is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with (minimum length of 1-3/8 inches) anchoring devices suitable for the wall material where the base unit will be placed.

TOP

1 Insert two mounting screws

 

 

 

 

 

 

 

3/16 in.

 

 

 

 

 

 

 

into the wall, (with their

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate anchoring device),

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-15/16 inches apart. Allow

 

 

 

 

 

 

 

 

about 3/16 of an inch between

 

 

 

 

 

 

 

3-15/16 in.

the wall and screwheads for

 

 

 

 

 

 

 

 

mounting the phone.

 

 

 

 

 

 

 

 

2 Refer to steps 1 through 9 on

 

 

 

 

 

 

 

 

page 7 and 8 to mount the

 

 

 

 

 

 

 

 

telephone.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Introduction to Your NEW Phone 32 33 34 35 45 46 47 Way Conference Features Caller ID FeaturesGetting Started BasicsNext, choose the best location to set up the base unit Base unitHandset Uniden Parts Department 800 Hours M-F 830 AM to 500 PM CSTChoose the best location If you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to ToneContact your telephone company for Assistance PulseStandard wall plate mounting Direct wall plate mounting With the base charging ContactsBattery use time per charge When the battery charge becomes lowCleaning the charging contacts Do not use any liquids or solventsDialing from Standby Mode ExampleOther Operations Dialing from Talk Mode Talk HighDial the phone number Example Enter Talk 017From the handset Incoming CallTalk 000 Normal 11535From the base Handset ringer tone and volume This switch turns the handset ringer on or offRedialing from Standby Mode Last three phone numbers dialed can be quickly redialedRedial1 Recent Redial2Redialing from Talk Mode Press talk Talk appears on the displayTalk Talk High When speaking on the handset When phone is ringingMemory Store Store NameEdit Memory07 Delete Memory07Is displayed Press mem To return to standby mode Store NumberStore Number is Memory07 StoredMemory dialing from Standby Mode Press mem Handset displays your programmed memory locationsMemory dialing from Talk Mode Press talk Talk and the volume setting appearsTalk 035 Uniden Corp John DOE Memory01 Stored Memory Store isEdit Memory02 Delete Memory02 Go Back Edit Memory02Down to Delete Memory Delete Memory02 Delete Memory02?When speaking on the handset When speaking on the baseSetting Caller ID options Auto TalkOffArea Code Auto Talk and CidcwData errors appear 11 1230PMHere are some typical displays As 2New Total02 Press ª to display the latest caller ID message17 1230PM When the pointer is at No Deleting a Caller ID messageDelete Message? Yes When the pointer is at Yes Deleting all Caller ID name/numbersDelete All? Yes Total00Calling a party from the Caller ID list Press talkªTalk Displayed phone number dials automaticallyStoring Caller ID messages in Memory dialing 1230PMSelect Location To return to the first caller, press flash again Integrated Turning the answering system on/off Press and hold clock Until a tone Sounds First, press skipNext, press skip Repeatedly until youPress skip Repeatedly until you hearSetting your greeting Preset MessageRecording a personal outgoing message Greeting Tone sounds and your message plays back on the phoneSwitch to Announce only featureSelecting the message record time Selecting a PIN codeSetting ring time switch Playing your messages Repeating a message Skipping a messageDeleting a message Voice memoDeleting individual message Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Additional Information To attach the beltclip To remove the beltclipBattery replacement and handling When slightly dirtyWhen very dirty When the charging terminals become dirtySymptom Suggestion Status LED wont Make sure the AC adapter is pluggedSymptom Suggestion At Uniden, we’ll take care of you Digital security code Earpiece volume Headset installation K, LW, X, Y, Z
Top Page Image Contents