Uniden EXS 2080 manual Remote access away from home, Command Function

Page 49

During the remote

operation, displays on the base.

You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new outgoing message, and to monitor sounds in the room.

1 Call your telephone number.

2 While the greeting message is played, press # and your PIN code.

If the answering system is off, let it ring 10 times until the greeting message is played. Then, press # and your PIN code.

3 The answering system announces the time and day stamp and the number of messages stored in memory. Then the message playback automatically begins.

4 You may continue to listen to your message, or you may select a command from the following chart.

Command Function

#then 1 Repeat a message

#then 2 Playing your messages

#then 3 Skipping a message

#then 4 Deleting a message

#then 5 Stop message playback

#then 6 Answering system on

#then 7 Voice memo record/stop

(up to 4 minutes recording time)

#then 8 Greeting message record/stop

#then 9 Answer system off

# then*

Room monitor

5 After all of your messages have played, or the playback time exceeds 4 minutes, you will hear that the intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6 When you finish, hang up to exit the system.

The answering system automatically returns to standby.	45

Image 49

Contents Page Introduction to Your NEW Phone 32 33 34 35 45 46 47 Caller ID Features Way Conference FeaturesGetting Started BasicsBase unit Next, choose the best location to set up the base unitHandset 800 Hours M-F 830 AM to 500 PM CST Uniden Parts DepartmentChoose the best location Connect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modeContact your telephone company for Assistance PulseStandard wall plate mounting Direct wall plate mounting Contacts With the base chargingWhen the battery charge becomes low Battery use time per chargeCleaning the charging contacts Do not use any liquids or solventsExample Dialing from Standby ModeOther Operations Talk High Dialing from Talk ModeDial the phone number Example Enter Talk 017Incoming Call From the handsetTalk 000 Normal 11535From the base This switch turns the handset ringer on or off Handset ringer tone and volumeLast three phone numbers dialed can be quickly redialed Redialing from Standby ModeRedial1 Recent Redial2Press talk Talk appears on the display Redialing from Talk ModeTalk Talk High When phone is ringing When speaking on the handsetStore Name Memory StoreEdit Memory07 Delete Memory07Store Number Is displayed Press mem To return to standby modeStore Number is Memory07 StoredPress mem Handset displays your programmed memory locations Memory dialing from Standby ModePress talk Talk and the volume setting appears Memory dialing from Talk ModeTalk 035 Uniden Corp John DOE Memory Store is Memory01 StoredEdit Memory02 Edit Memory02 Delete Memory02 Go BackDown to Delete Memory Delete Memory02 Delete Memory02?When speaking on the base When speaking on the handsetAuto TalkOff Setting Caller ID optionsArea Code Auto Talk and Cidcw11 1230PM Data errors appearHere are some typical displays As 2Press ª to display the latest caller ID message New Total0217 1230PM Deleting a Caller ID message When the pointer is at NoDelete Message? Yes Deleting all Caller ID name/numbers When the pointer is at YesDelete All? Yes Total00Press talk Calling a party from the Caller ID listªTalk Displayed phone number dials automatically1230PM Storing Caller ID messages in Memory dialingSelect Location To return to the first caller, press flash again Integrated Press and hold clock Until a tone Sounds First, press skip Turning the answering system on/offNext, press skip Repeatedly until youRepeatedly until you hear Press skipPreset Message Setting your greetingRecording a personal outgoing message Greeting Tone sounds and your message plays back on the phoneAnnounce only feature Switch toSelecting the message record time Selecting a PIN codeSetting ring time switch Playing your messages Skipping a message Repeating a messageVoice memo Deleting a messageDeleting individual message Deleting all messagesRecording a conversation Command Function Remote access away from homeRemote room monitor Additional Information To remove the beltclip To attach the beltclipWhen slightly dirty Battery replacement and handlingWhen very dirty When the charging terminals become dirtyStatus LED wont Make sure the AC adapter is plugged Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you K, L Digital security code Earpiece volume Headset installationW, X, Y, Z