Holding skip or
repeat to scroll through numbers on the display.
Selecting the message record time
You can set your answering system to record messages up to one or four minutes long.
One minute option: move the REC TIME switch to 1.
Four minutes option: |
|
move the REC TIME | REC TIME |
switch to 4. | ANN/4/1 |
|
ªAnnounce only feature:
The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.
The message counter LED displays “ ” when system is on standby.
Prerecorded outgoing message for Announce only feature is: “Hello, no one is available to take your call.” (twice)
Selecting a PIN code
To play your messages from a remote location, you will need to enter a
1 On the base, press and hold pin until a beep sounds and the LED
displays .
2 To set the first number, press
skip or repeat
repeatedly to scroll from 0 to 9. When the desired number appears in the display, press pin .
skip/
3 To set the second number, press
skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press
pin . Then the entered PIN code is announced.
39