Uniden EXS 2080 manual Setting Caller ID options, Auto TalkOff, Area Code, Auto Talk and Cidcw

Page 31

You must subscribe to Caller ID on Call Waiting in order to use this feature.

You must subscribe to the Caller ID service to use this feature.

When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone.

The handset displays the phone number of the incoming call, the name, time, and the number of calls. Additionally, you can dial the displayed number, and store the information for memory dialing.

CALLER ID FEATURES

Setting Caller ID options

There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code.

AutoTalk allows you to answer the phone without pressing the

talk button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not on the base press any key (except mute/ring ) to answer the call. If the phone rings when AutoTalk is off, you must press talk to answer the call.

Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting number.

You must subscribe to CIDCW from your phone company in order to use this feature.

If you enter 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

If your calling area requires 10-digit dialing, do not program this option.

To change your Caller ID options:

1

 

 

 

 

 

 

 

1 Auto Talk:Off

 

Press down set up

 

.

2 CIDCW

:On

 

 

The following screen appears.

3 Area Code:

 

2

Use the

•

and

ª

keys or a number key(1-3) to move

 

 

 

 

 

the cursor to the selection that you would like to change.

 

 

Press the

select/ch

key to toggle between On and Off for

 

3

Auto Talk and CIDCW.

 

 

 

When you wish to enter Area Code, press ª or the number

 

 

key

3

to move the cursor to select Area Code. Then

 

 

press

select/ch

and enter the 3 digits area code by using the

 

 

number keypad

0

 

- 9 . After entering Area Code, press

 

4

select/ch .

 

 

 

 

 

 

 

After you have made your selections, press set up

and

27

 

return the handset to the base.

 

 

 

 

 

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Page Introduction to Your NEW Phone 32 33 34 35 45 46 47 Basics Way Conference FeaturesCaller ID Features Getting StartedBase unit Next, choose the best location to set up the base unitHandset 800 Hours M-F 830 AM to 500 PM CST Uniden Parts DepartmentChoose the best location Connect the base unit If you want to install the base unit on the wall, seePulse Choose the dialing modeIf your dialing system is Set the switch to Tone Contact your telephone company for AssistanceStandard wall plate mounting Direct wall plate mounting Contacts With the base chargingDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the charging contactsExample Dialing from Standby ModeOther Operations Talk 017 Dialing from Talk ModeTalk High Dial the phone number Example Enter11535 From the handsetIncoming Call Talk 000 NormalFrom the base This switch turns the handset ringer on or off Handset ringer tone and volumeRedial2 Redialing from Standby ModeLast three phone numbers dialed can be quickly redialed Redial1 RecentPress talk Talk appears on the display Redialing from Talk ModeTalk Talk High When phone is ringing When speaking on the handsetDelete Memory07 Memory StoreStore Name Edit Memory07Memory07 Stored Is displayed Press mem To return to standby modeStore Number Store Number isPress mem Handset displays your programmed memory locations Memory dialing from Standby ModePress talk Talk and the volume setting appears Memory dialing from Talk ModeTalk 035 Uniden Corp John DOE Memory Store is Memory01 StoredDelete Memory02? Edit Memory02 Delete Memory02 Go BackEdit Memory02 Down to Delete Memory Delete Memory02When speaking on the base When speaking on the handsetAuto Talk and Cidcw Setting Caller ID optionsAuto TalkOff Area CodeAs 2 Data errors appear11 1230PM Here are some typical displaysPress ª to display the latest caller ID message New Total0217 1230PM Deleting a Caller ID message When the pointer is at NoDelete Message? Yes Total00 When the pointer is at YesDeleting all Caller ID name/numbers Delete All? YesDisplayed phone number dials automatically Calling a party from the Caller ID listPress talk ªTalk1230PM Storing Caller ID messages in Memory dialingSelect Location To return to the first caller, press flash again Integrated Repeatedly until you Turning the answering system on/offPress and hold clock Until a tone Sounds First, press skip Next, press skipRepeatedly until you hear Press skipTone sounds and your message plays back on the phone Setting your greetingPreset Message Recording a personal outgoing message GreetingSelecting a PIN code Switch toAnnounce only feature Selecting the message record timeSetting ring time switch Playing your messages Skipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Additional Information To remove the beltclip To attach the beltclipWhen the charging terminals become dirty Battery replacement and handlingWhen slightly dirty When very dirtyStatus LED wont Make sure the AC adapter is plugged Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you K, L Digital security code Earpiece volume Headset installationW, X, Y, Z
Top Page Image Contents