Uniden EXS 2080 manual Symptom Suggestion

Page 55

Symptom	Suggestion
The Caller ID/CIDCW	• The handset was picked up before
does not display.	the second ring.
	• The call was placed through a switch
	board.
	• Call your local telephone company
	to verify your Caller ID service is
	current.
	• Make sure that the CIDCW option is
	set to ON.

The answering system	• Make sure the base unit is plugged
does not work.	in.
	• Make sure that the answering system
	is turned on.
	• Make sure that the message record
	time is not set to ANN (See page
	39).

Messages are	• The incoming messages may be too
incomplete.	long. Remind callers to leave a
	brief message.
	• The memory may be full. Delete
	some or all of the saved messages.

After a power failure,	• Record your greeting again.
the outgoing message	The preset messages should remain.
is deleted.

No sounds on the base	• Adjust the speaker volume on the
unit speaker during call	base unit.
monitoring or message
playback.

Cannot access remote	• Make sure you are using the correct
call-in features from	PIN number.
another touch-tone	• Make sure that the touch-tone phone
phone.	you're using can transmit the tone
	for at least two seconds. If it
	cannnot, you may have to use
	another phone to access your
	message.

51

Image 55

Contents Page Introduction to Your NEW Phone 32 33 34 35 45 46 47 Basics Way Conference FeaturesCaller ID Features Getting StartedBase unit Next, choose the best location to set up the base unitHandset 800 Hours M-F 830 AM to 500 PM CST Uniden Parts DepartmentChoose the best location Connect the base unit If you want to install the base unit on the wall, seePulse Choose the dialing modeIf your dialing system is Set the switch to Tone Contact your telephone company for AssistanceStandard wall plate mounting Direct wall plate mounting Contacts With the base chargingDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the charging contactsExample Dialing from Standby ModeOther Operations Talk 017 Dialing from Talk ModeTalk High Dial the phone number Example Enter11535 From the handsetIncoming Call Talk 000 NormalFrom the base This switch turns the handset ringer on or off Handset ringer tone and volumeRedial2 Redialing from Standby ModeLast three phone numbers dialed can be quickly redialed Redial1 RecentPress talk Talk appears on the display Redialing from Talk ModeTalk Talk High When phone is ringing When speaking on the handsetDelete Memory07 Memory StoreStore Name Edit Memory07Memory07 Stored Is displayed Press mem To return to standby modeStore Number Store Number isPress mem Handset displays your programmed memory locations Memory dialing from Standby ModePress talk Talk and the volume setting appears Memory dialing from Talk ModeTalk 035 Uniden Corp John DOE Memory Store is Memory01 StoredDelete Memory02? Edit Memory02 Delete Memory02 Go BackEdit Memory02 Down to Delete Memory Delete Memory02When speaking on the base When speaking on the handsetAuto Talk and Cidcw Setting Caller ID optionsAuto TalkOff Area CodeAs 2 Data errors appear11 1230PM Here are some typical displaysPress ª to display the latest caller ID message New Total0217 1230PM Deleting a Caller ID message When the pointer is at NoDelete Message? Yes Total00 When the pointer is at YesDeleting all Caller ID name/numbers Delete All? YesDisplayed phone number dials automatically Calling a party from the Caller ID listPress talk ªTalk1230PM Storing Caller ID messages in Memory dialingSelect Location To return to the first caller, press flash again Integrated Repeatedly until you Turning the answering system on/offPress and hold clock Until a tone Sounds First, press skip Next, press skipRepeatedly until you hear Press skipTone sounds and your message plays back on the phone Setting your greetingPreset Message Recording a personal outgoing message GreetingSelecting a PIN code Switch toAnnounce only feature Selecting the message record timeSetting ring time switch Playing your messages Skipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Additional Information To remove the beltclip To attach the beltclipWhen the charging terminals become dirty Battery replacement and handlingWhen slightly dirty When very dirtyStatus LED wont Make sure the AC adapter is plugged Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you K, L Digital security code Earpiece volume Headset installationW, X, Y, Z