Uniden TRU3466 Traveling Out-of-Range, Selecting a Different Channel, Flash and Call Waiting

Page 21

Traveling Out-of-Range

During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 30 seconds.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the channel for clearer operation. Interference can come from appliances or other phones in your home. This function works only when the phone is use.

The select/channel on the handset allows you to choose between 35 different channels. During the course of a conversation, if you hear static or noise which makes it difficult to hear, press select/channel. The following screen appears and

the phone changes to a different

channel. For more information on interference, refer to ”Technical Information” on page 45.

Flash and Call Waiting

If you have ”Call Waiting” service and a call waiting tone sounds while you are on a call, press flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press flash again.

note	You must subscribe through your local telephone company to receive Call Waiting Service.

BASICS

note

The flash feature does not function when

line 1 and line 2 are on a conference call. (See

3-way conferencing and

4-way conferencing, pages 22 and 23).

B A S I C S [ 17 ]

Image 21

Contents U 3 4 6 Page Page Welcome FeaturesContents Controls and Functions N T R O L S a N D F U N C T I O N S Read This First Checking the Package Contents Do the following steps Setting up the PhoneInstall the battery pack Battery use time per charge Low battery alertCleaning the charging contacts Connect the base unit For 2 line subscriptions Choose the dialing modeSetting Caller ID Options Press select/channel Entering Your Area CodeMaking and Receiving Calls TerminologyBasic 2-line operation Adjusting the Handset Ringer and Earpiece Volume Redialing from Standby Mode From the Handset Redialing a CallTip Tone Dialing Switch-over Redial from Talk ModeFrom the Base Traveling Out-of-Range Selecting a Different ChannelFlash and Call Waiting Answering a Call from the Handset Answering a Call from the BaseMaking a Call from the Base Dialing from talk modeMaking a Call from the Handset Dialing from StandbyPlacing a Call on Hold Using the Speakerphone Mute FeatureExtension In Use Line OperationWay Conferencing Press /up/intcm on the handset. Speak to answer Using Your TRU3466 Intercom Paging from the base to handsetPaging from the handset to base Using the Speakerphone Call Transfer FeatureTo Transfer from the Handset to the Base To Transfer from the Base to the HandsetWith the Handset Storing a Phone Number and NameMemory Features If you make a mistake while entering a name Steps for Entering Names and Special CharactersWith the base MemorygettingfeaturesDisplay a programmed number Making Calls with Memory DialingEditing a Stored Name and/or Phone Number Chain DialingPress /up/intcm or /down/conf. to select Erasing a Stored Name and Phone Number Press select/channel or delete/volumeCaller ID When the Telephone RingsHere are some typical displays Viewing the Caller ID Message ListCalling a Caller ID name/number Using the Caller ID ListStoring a Caller ID number in a memory location Long Distance calls and Area Code setting/CancellationDeleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Using Cidcw Caller ID with Call WaitingChanging the Digital Security Code Headset Installation Installing the BeltclipTo attach the beltclip To remove the beltclipMaintenance Troubleshooting Battery Information General InformationAC Adapter Information Technical Information Telephone Line ProblemsFCC wants you to know RangeCordless Telephone Privacy More Than One Cordless TelephoneIndex Memo Memo Memo Please do not Return this Product to the Place of Purchase At Uniden, we´ll take care of youUCZZ01747BZ