note
Only the last number dialed can be accessed after the selected line key has been pressed.
note
The tone feature only applies when the dial mode is set to pulse.
Redial from Talk Mode
1)Press line1.
2)Press redial/pause.
The last number dialed will be displayed and redialed.
3)To hang up, press the select line key or place the handset on the base. The
From the Base
1)To call the last number dialed from the base, press line 1.
2)Press redial/pause. The last number dialed from the base is redialed.
3)To hang up, press the selected line key.
Tone Dialing Switch-over
Some telephone companies use equipment that require pulse 
dialing (sometimes referred to as rotary dialing). If you 
need to enter tone dialing digits, you can 
dialing during the call. An example of this could be entering your bank account number after you have called your bank. The digits of your bank account can be entered using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call connects, press * /t/tone for the handset, or * /tone for the base. Enter the desired number (like in example above the bank account number). These digits will be sent as tone dialing. This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 31). Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
[ 16 ] B A S I C S