3.2TCP/IP Settings
DHCP Mode
When your Router powers up, the Dynamic Host Configuration Protocol (DHCP) server (on the device) will start automatically. To set your PC for DHCP mode, check the Internet Protocol properties of your Local Area Connection. You can set your PC to DHCP mode by selecting Obtain an IP address automatically in the dialog box shown below.
STATIC IP Mode
To configure your Router manually, your PC must have a static IP address within the Router’s subnet. The following steps show how to configure your PC IP address using subnet 192.168.1.x. The following assumes you are running Windows XP.
1:From the Network Connections window, open Local Area Connection (You may also access this screen by
2:Select Internet Protocol (TCP/IP) and click the Properties button. The screen should now display as below. Change the IP address to the domain of 192.168.1.x (1<x<254) with subnet mask of 255.255.255.0. Set the default router and DNS server to the router’s IP address.
NOTE: | The IP address of the router is 192.168.1.1 (default), so the PC must be set with a different IP. In the case below, the PC’s IP |
| address is set as 192.168.1.2 |
3: Click OK to submit the settings.
14 – 3G10WV HSPA
