NordicTrack 3G10WV manual Description set remote bridge MAC address

[--rmac3 <MACaddress>] [--rmac4 <MACaddress>] Options:

--mode <apwds>

Description: configure wireless AP mode.

Default value: ap

--restrict <enableddisabled>

Description: enable or disable bridge restrict mode.

Default value: disabled --rmac1 <MACaddress> --rmac2 <MACaddress> --rmac3 <MACaddress> --rmac4 <MACaddress>

Description: set remote bridge MAC address

Note: The “--restrict” option have to be enable before setting any restrict MAC address (--rmac1~4) or the restrict MAC address setting will be ignored.

The behavior of WDS is similar to connecting two or more AP using a hub. However, please be aware of the IP assignment to prevent assigning two or more hosts / STAs to the same IP address. To avoid IP address conflict, only enable DHCP server in one router and disable the other router DHCP server.

WDS CLI (command line interface) does NOT support Enable (Scan) mode in Bridge Restrict while using WUI (Web UI) does. When Bridge Restrict set to Enable (Scan) mode in WUI, the CLI will show Bridge Restrict disabled.

Example 4:

After example 3, the user want to connect another AP which has DHCP disabled and the MAC address is 00:12:34:56:78:9a

wlan wds --mode wds --restrict enabled --rmac1 00:12:34:56:78:9a

Show wireless LAN interface configurations

Description: show the current configuration of the wireless LAN interface Synopsis:

wlan info [--config] [--security] [--macfilter] [--wds] [--station] Options:

--config

Description: display the list of parameters from config option Example:

3G10WV HSPA Wi-Fi Router with Voice – 89