--macfilter

list parameters of macfilter command

--wds

list parameters of wds command

--station

list authenticated wireless stations and their status

NOTE 5:

You can use this command to view your wireless settings; no matter the settings are modified from web or CLI, the command will show the latest information for you.

Example 5:

After example 4, if we forgot our ssid, we can view the ssid with the following command. wlan info --config

--help: Display usage for WLAN interface.

Scenario 2 to configure AP with OPEN-disabled security: wlan config --enable 1--ssid “WLAN_TLF” --hannel 8 wlan security open --wep disabled

Scenario 3 to configure AP with Shred-WEP security wlan config --enable 1--ssid “WLAN_TLF” --hannel 8

wlan security shared --wep enabled --nkey1 1234567890123 --keyidx 1 Scenario 4 to configure AP with 802.1X security

wlan config --enable 1--ssid “WLAN_TLF” --hannel 8

wlan security radius --rasip 172.16.2.199 --raskey “whatever” --wep enabled

Scenario 5 to configure AP with WPA-PSK security wlan config --enable 1--ssid “WLAN_TLF” --hannel 8 wlan security psk --pskey “123456789” --wpaenc aes

Scenario 6 to configure AP with WPA2 security

wlan config --enable 1--ssid “WLAN_TLF” --hannel 8 wlan security wpa2 --rasip 172.16.2.199 --wlPreauth 1

94 – 3G10WV HSPA Wi-Fi Router with Voice

Page 94
Image 94
NordicTrack 3G10WV manual Scenario 6 to configure AP with WPA2 security