Options | Description |
|
|
Filter Name | The filter rule label |
|
|
Protocol | TCP, TCP/UDP, UDP or ICMP |
|
|
Source IP address | Enter source IP address |
|
|
Source Subnet Mask | Enter source subnet mask |
|
|
Source Port | Enter source port number or port range |
(port or port:port) |
|
|
|
Destination IP address | Enter destination IP address |
|
|
Destination Subnet Mask | Enter destination subnet mask |
|
|
Destination port | Enter destination port number or range |
(port or port:port) |
|
|
|
Click Save/Apply to save and activate the filter.
Incoming IP Filter
The default setting for all Incoming traffic is BLOCKED. Under this condition only those incoming IP packets that match the filter rules will be ACCEPTED.
To add a filtering rule, click the Add button. The following screen will display.
Please refer to the Outgoing IP Filter table for field descriptions.
Click Save/Apply to save and activate the filter.
3G10WV HSPA
