NordicTrack 3G10WV manual Example

3G10WV - HSPA 7.2Mbps Wi-Fi Router with Voice USER GUIDE --rekey <interval>

Description: Set the Group Rekey Interval

Default value: 0

--pskey <”pskeyStr”>

Description: Set the WPA Pre-Shared Key

Valid value: string of 8 ~ 63 characters.

Note: 1. wlPreauth can only be used with WPA2.

2.When using WPA-PSK or WPA2-PSK, WPA Pre-Shared Key (pskey) must be set first.

3.WEP MUST be enable when security is set to shared / 802.1X radius security mode.

4.WEP MUST be disable when security is set to WPA/WPA-PSK security mode

5.When setting keyidx to N for WEP key, ensure that the nkeyN field has a string value.

6.Always issue a complete security command. For example, once WEP is enabled, it will still be enabled even after changing the security mode, until the command “--wep disabled” is received by the router.

Example 2:

After setting up the wireless configuration in example 1, the user wants to configure the wireless LAN security. Scenario 1:

WPA2 with Radius server IP address of 172.16.2.199 wlan security wpa2 --rasip 172.16.2.199 --wlPreauth 1 Scenario 2:

WPA-PSK with “123456789” as the passkey.

wlan security psk --pskey “123456789” --wpaenc aes --wep disabled Scenario 3:

802.1X with Radius server IP of 172.16.2.199 and RADIUS key as “whatever” wlan security radius --rasip 172.16.2.199 --raskey “whatever” --wep enabled

3G10WV HSPA Wi-Fi Router with Voice – 87