28
Preparations (Setup)
Select video output format
When the television monitor used is connected for component
video and supports progressive inputs, set this option to select
the kind of player output, either interlace scan or progressive
scan.
—
Audio1 Video1 Language General
A2 V2
Exit
Move
TV Screen
Component Video
16:9(Wide)
Interlace
Progressive
SETUP
Interlace:
Select this option when the television or projector does not sup-
port progressive inputs (factory default setting).
Progressive:
This mode produces finely detailed, high-definition images and
should be selected when using a television or projector that sup-
ports progressive inputs.
Do not select [Progressive] when the television connected
does not support progressive inputs, since no image will be
output. If this option is selected by mistake, trying connecting
the video cable to another video connector, then change the
setting.
■Compatibility of this unit with progressive scan
televisions
At present, certain progressive-scan televisions do not have
complete compatibility with this player, with the result that
visual distortion may be produced. If you notice distortion
during progressive playback, try changing the player’s output
to [Interlace]. For more information regarding compatibility
of progressive-scan televisions with this player, consult your
Pioneer dealer, or Pioneer Electronics (USA) Inc. Customer
Support Division listed at the end of this manual.
Select S-Video output (Expert Mode)
Set this option to select the video signal output from the S-Video
connector.
When the S-Video connector is used to connect the player to
a television set, the image may appear vertically compressed
(or stretched horizontally). In this case, select [S1].
—
—
—
Audio1 Video1 Language General
A2 V2
Exit
Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide
)
Interlace
S1
S2
SETUP
S2:
The S2 video signal is output (factory default setting).
S1:
The S1 video signal is output.
Screen Saver setting (Expert mode)
The screen saver function is provided in order to prevent image
burn (residual image) on a television screen when a single image
is paused or otherwise remains on the screen for an extended
period of time.
When enabled, the screen saver function operates after an
image has been displayed for about five minutes.
—
—
—
—
Audio1 Video1 Language General
A2 V2
Exit
Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide
)
Interlace
S2
On
Off
SETUP
On:
Screen saver function is enabled (factory default setting).
Off:
Screen saver function is disabled.
★In DJ mode, the screen saver function does not operate
when the unit is in pause mode.
Video quality adjust
The video quality can be set to provide optimum reproduction of
specific types of image (movies, animation, etc.). Further, each
of the video image quality options can be set individually, and
each setting can be recorded in memory. If playback is performed
while displaying the initial setup menu, the picture quality can be
adjusted while viewing the actual television image.
To select a preset picture quality
1. Using the four sides of the cursor button (2/3/
5/∞), select [Video2] \ [Video Adjust] \ [Start].
—
—
Video2
A2 Language General
Audio1 V1
Exit
Move
Background
Video Adjust
Pioneer Logo
Start
Picture Quality Controls
SETUP
S1 Video Output:
S1 is S-Video with added signal for discrimination of aspect
ratio (4:3, 16:9).
S2 Video Output:
S2 is the S1 signal with the addition of another signal for dis-
crimination of the picture viewing format (letter box, pan and
scan). When played on a wide television supporting S2, the
appropriate picture mode will be selected automatically.