TIME MODE/AUTO CUE

UNLOCK/LOCK

MODE

STOP

NORMAL/DJ

 

 

 

TOUCH/

 

 

BRAKE

SUBTITLE

 

RELEASE

AUDIO

 

/START

 

 

CUE

 

 

PLAY/

 

 

PAUSE

 

 

Auto cue function

This function is not supported when the rear panel mode select switch (MODE NORMAL/DJ) is set to the NORMAL position.

This function is used to skip non-recorded (silent) portions at the begin- ning of tracks and automatically set the cue point (P. 40) immediately before actual sound begins when loading a disc, performing track search (chapter search), and when the playback track (chapter) changes.

Setting auto cue ON/OFF

Hold the TIME MODE/AUTO CUE button depressed for 1 second or more to alternate the auto cue function ON/OFF. The display’s auto cue indicator (A.CUE) lights when the auto cue function is active.

The auto cue function ON/OFF status is memorized even when the player’s power is turned off.

The auto cue sensitivity level can be changed if desired.

Changing the auto cue sensitivity level

1.Hold the TIME MODE/AUTO CUE button depressed for 5 seconds or more.

The display will show the “A.CUE –60dB indicator (factory de- fault setting).

2.Press the cursor button’s LEFT/RIGHT sides (2/3) to change the sensitivity level.

Supported sensitivity levels include: –36dB, –42dB, –48dB, –54dB,

–60dB, –66dB, –72dB, –78dB.

Either press the TIME MODE/AUTO CUE button or wait 15 sec- onds and the setting mode will be canceled and the newly se- lected level will be set.

The newly set sensitivity level is memorized even when the play- er’s power is turned off.

To stop playback

When the eject/stop mode select switch (UNLOCK/LOCK) is set to UNLOCK: Press the STOP button.

When the eject/stop mode select switch (UNLOCK/LOCK) is set to LOCK: During playback, press the PLAY/PAUSE (6) button, or if a cue point has been set, during playback press the CUE button to initiate back cue, then press the

STOP button.

When STOP button is pressed in the NORMAL mode during DVD playback, the “RESUME” message will be displayed, and the place where the disc is stopped will be stored in memory (resume function).

To resume playback from the place earlier stopped, press the PLAY/ PAUSE (6) button.

The resume function is canceled if the disc is removed or if the STOP button is pressed again while already in the stop mode.

Basic Operations

To temporarily interrupt playback (pause mode)

During playback, press the PLAY/PAUSE (6) button.

The outer rim indicators of the PLAY/PAUSE (6) button and CUE button will flash, and playback will be interrupted.

Some DVDs prohibit the use of playback pause; in this case pressing

the PLAY/PAUSE (6) button will cause the prohibited mark to

light, and the corresponding prohibited mark

will appear on the

preview monitor.

 

If the PLAY/PAUSE (6) button is pressed when the unit is in the pause mode, the button rim indicators will go out and playback will resume.

If the pause mode is allowed to continue for 80 minutes or more, the

disc playback will automatically stop. In this case, press the PLAY/ PAUSE (6) button to resume playback.

[In DJ mode, with jog mode set to VINYL mode OFF]

Placing the player in pause mode enables audible pause (the video image appears as a still image, but audio sound can be heard inter- mittently). If sound is not desired in this case, lower the audio mixer’s

output level.

[In DJ mode, with jog mode set to VINYL mode ON]

Placing the player in pause mode enables silent pause (still image with no sound).

The TOUCH/BRAKE response dial can be used to modify the disc’s deceleration speed (time until playback stops).

The RELEASE/START response dial can be used to modify the disc’s playback acceleration time (time until disc reaches full playback speed).

[In NORMAL mode]

Placing the player in pause mode enables silent pause (still image with no sound).

To change language/subtitle settings during playback (DVD only)

To change language during playback:

The language setting can be changed during playback when the DVD has been recorded with multiple language options.

Press the AUDIO button.

The currently selected audio (language) option will be displayed on the screen. Each time the button is pressed the language will alternate be- tween the available language options.

If the language is changed when the player is in DJ mode, both video and audio playback will be temporarily interrupted (due to writing to buffer memory).

Some discs do not allow the audio language option to be changed with the AUDIO button (pressing the button will cause the prohibited

mark to light, and the corresponding prohibited mark will ap- pear on the screen). In this case, go to the disc’s main menu to switch the language option.

When a disc is removed from the player, the language setting will revert to that selected on the Setup Menu (P.30).

With some discs, changing the language will cause the image to pause momentarily.

Changing the subtitle option during playback

This option is not supported when the rear panel mode select switch (MODE NORMAL/DJ) is set to DJ (subtitles are not dis- played in DJ mode).

The subtitle language can be changed when the DVD has been recorded with multiple subtitle language options.

Press the SUBTITLE button.

The currently selected subtitle option will be displayed on the screen. Each time the button is pressed, the subtitle language will alternate be- tween the available options; if OFF is selected, subtitles will not appear.

Some discs do not allow the subtitle option to be changed with the

SUBTITLE button (pressing the button will cause the prohibited mark

to light, and the corresponding prohibited mark will appear on the screen). In this case, go to the disc’s main menu to switch the subtitle language.

When a disc is removed from the player, the subtitle setting will re- vert to that selected on the Setup Menu (P.31).

37

Page 37
Image 37
Pioneer DVD PLAYER, DVJ-X1 Auto cue function, To stop playback, To temporarily interrupt playback pause mode