Long Distance calls and Area Code setting/Cancellation
Press 1 while the incoming call information is displayed will set or cancel a long distance call. Pressing 3 will set or cancel an area code setting.
Storing a Caller ID number in a memory location
1) Press cid/hold. The Caller ID summary screen shows the number of new callers and total number of calls.
2) Use * /t/tone or # /s to select ”Line1” or ”Line2” Caller ID.
3) Press ▲/up/intcm or ▼/down/conf. to f ind the name/number that you would like to store.
4) Press memory to store the selected message. The following screen appears:
5)The ”Select Location” screen appears. Use the ▲/up/intcm and ▼/down/conf. to select a blank memory location where you would like to store the number.
(If you want to replace an existing number with the Caller ID number, skip to step 7).
6)Press select/channel. A conf irmation tone sounds. The number is programmed.
7)If you choose to replace an existing number with the
Caller ID number, press select/channel.
The following screen appears:
8)Use the ▲/up/intcm to move the cursor to ”Yes”. Press select/channel. A conf irmation tone sounds. The number is programmed.
note
•You cannot make a call from the Caller ID list if your TRU3466 is connected to a private branch exchange (PBX).
•If you select ”No”, then the Caller ID screen returns.
CALLER ID FEATURES
C A L L E R I D F E AT U R E S [ 37 ]