note
•In memory dialing operation, you must press a key within 20 seconds or the phone will return to standby. If you return the handset to the base, the phone will return to standby also.
•You have 20 seconds after pressing memory to enter the number you wish to store. Otherwise, an error tone will sound.
Storing a Phone Number and Name
Memory Dialing allows you to dial a number using just a few key presses. TRU3466 series stores up to 30 names/numbers in the handset and 10 numbers in the base.
With the Handset
1)Press and hold memory until ”Memory Store” is displayed.
2)Press ▲/up/intcm and ▼/down/conf. or enter a number (01-
30) to select the memory location where you would like to store the number.
3)Press select/channel.
The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored. Then you must either change the entry in this location, clear the entry in this location, or select
” Go back” to choose another location.
4)To enter a name (up to 13 characters), use the number keys.
• See ”Steps for Entering Names and Special Characters”. (See pages
•Use # /s and * /t/tone to move the cursor to the desired locations. •Use delete/volume to delete characters as needed.
• P ress and hold delete/volume to delete all the characters. •If a name is not required, go to step 5.
[ 26 ] M E M O RY F E AT U R E S