Uniden WXI377 manual Direct wall mounting

Page 14

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.

2) Refer to steps 1 through 6 on page 13 to mount the telephone.

[ 14 ] G E T T I N G S TA R T E D

www.uniden.com

Image 14

Contents Page Page Telephone cord Base unitHandset Contents Features WelcomeControls and Functions N T R O L S a N D F U N C T I O N S Do the following steps Setting up the PhoneChoose the best location Avoid microwave ovensActivate the handset before charging the battery Getting StartedReplace the rechargeable handset battery pack Talk Mode Battery use time per charge Low battery alert Standby ModeConnect the base unit AC adapterMounting the Base Unit on a Wall Standard wall plate mountingDirect wall mounting Setting Menu Options Caller ID optionsEntering Your Area Code Choosing the dialing mode Setting the language Making and Receiving Calls Handset On Base Handset Off BaseEarpiece volume Adjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volume RedialTone Dialing Switch-over Traveling Out-of-RangeSelecting a Different Channel Flash and Call WaitingStoring Phone Numbers and Names Memory DialingE M O R Y D I a L I N G Steps for Entering Names and Special Characters If you make a mistake while entering a nameMaking Calls with Memory Dialing Memory dialing from Standby ModeMemory dialing from Talk Mode Chain Dialing Editing a Stored Name and/or Phone NumberCursor flashes indicating that the display is ready for Erasing a Stored Name and Phone Number Press select or delete/chMaking Calls with the RocketDial RocketDialStoring and Editing the RocketDial Deleting the RocketDial C K E T D I a LCaller ID When the Telephone RingsYou must subscribe to Caller ID service to use this feature Viewing the Caller ID Message List Press cid/menuDeleting Information from the Caller ID List When the pointer is at YesWhen the pointer is at No Deleting a Caller ID messageCalling a party from the Caller ID list Using the Caller ID ListLong Distance calls and Area Code Setting/Cancellation Storing Caller ID messages in Memory dialing To attach the beltclip Installing the BeltclipChanging the Digital Security Code To remove the beltclipPower Failure MaintenanceBattery replacement and handling When the handset or base unit becomes slightly dirtyTroubleshooting Symptom Suggestion Charge/in use LED wontSymptom Suggestion Liquid Damage Case ActionAC Adapter Information Battery InformationGeneral Information Important Electrical Considerations PrecautionsImportant Safety Instructions Installation Considerations One Year Limited WarrantyTerminal Equipment Radio Equipment G, H At Uniden, we´ll take care of you