Uniden XC 320 Dialing a Stored Number, One-Touch Dialing, Erasing a Stored Number, Chain Dialing

NOTE: Youcanalso storea mixed tone-pulse number in a ONE-TOUCH

DIALlNGbutton. To do this, follow steps 2 through 5 in "Storing a Mixed Tone/Pulse Number".

4.Press MEM,and the ONE-TOUCHDIALlNGbutton (1,2,or 3) you wish to program.

You will hear a long beep when the number you have entered has been successfully stored.

NOTE: You have 20 seconds after pressing MEMto enter the number you wish to store. Otherwise, an error tone will sound.

5.Write the stored-number and its ONE-TOUCHDIALlNGbutton on one of the enclosed stickers so you won'tforget them.

Dialing a Stored Number

To dial a number previously stored in memory, press TALK,then press MEM

and the memory number (01-20). Your XC 320 will then dial the previously stored number.

One-Touch Dialing

To dial a number previously stored in a ONE-TOUCHDIALlNGbutton (1,2,or 3), pressTALK,andthenpressthe ONE-TOUCHDIALlNGbutton for that number.

Chain Dialing

On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. You can do this conveniently by first storing the access code into one of the memory numbers. Then, after dialing the main number, press MEMand the memory number of the access code at the appropriate time.

Erasing a Stored Number

1.Remove the Handset from the Base Unit. Do not press TALK.

2.Press MEMtwice.

3.Press the memory location number or the ONE-TOUCHDIALlNGbutton you want to clear.

You will hear a long beep confirming that you have erased the number.

19