Connecting the AC Power

If you are mounting the XC 320 on an existing standard wall plate:

1.Plug one end of the Telephone Line Cord (supplied) into the "TELLINE" jack on the top of the Base Unit. Lay the cord inside the molding on the bottom of the Base Unit. Then plug the other end of the cord into the telephone wall socket.

2.Mount the Base Unit onto the wall plate. Then hang the Handset on the cradle.

If you are mounting the XC 320 elsewhere:

1.Carefully select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

2.If a mounting template came with your standard telephone wall plate (not included), use it to determine where to insert the mounting screws. Make sure the screws are securely fastened, and that the wall material is

capable of supporting the weight of the Base Unit; otherwise, damage to the Base Unit could result.

3.Plug one end of the Telephone Line Cord (supplied) into the "TELLINE" jack on the Base Unit. Lay the cord inside the molding on the bottom of

the Base Unit. Then plug the other end of the cord into the telephone wall socket.

4.Mount the Base Unit onto the wall plate. Then hang the Handset on the cradle.

1.Plug the end of the AC Adapter cord into the 9V DC input jack on the Base Unit.

2.Plug the AC Adapter into a standard mains 230 - 240 VAC wall outlet.

3.Route the power cord where it will not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards. (Note: When the Base Unit is mounted on a wall, the AC Adapter cord will fit in the molding on the underside.)

Installing the Battery Pack (BT-161)

Note About Battery Replacement

The built-in Memory Backup feature allows up to 3 minutes after disconnecting the old Battery Pack to install a new one without losing any phone numbers that may be stored in the telephone'smemory.