
Setting the Base Unit Ringer Volume
To enable the Base Unit to ring when an incoming call is received, or when a
page is sent from the Handset, set the BASEUNITRINGERswitch to either "LO" or "HI".
Placing a Call
To place a call with your XC 320:
1.Remove the Handset from the Base Unit and press TALK.
2.Dial the number you are calling.
3.When you have finished the call, press TALKor return the Handset to the Base Unit.
NOTE: If you don't place the Handset back on the Base Unit, you will need to press TALKto hang up the phone.
Selecting a Channel
The CHANNELbutton on the Handset allows you to choose among factory set channels. If you are receiving static or other interference on a channel, press the button to switch to another channel. This function works only when the phone is in use.
NOTE: If you have more than one cordless phone in your house, they must be set to different channels.
Using the Flash Button
Use FLASHto send a timed
FlASH/RTONEbuttonwhileoperatingthe.Handset.
Setting the Receiver Volume
While on a phone call, press the VOlUME/RVOl. button to select either loud or soft volume.
16