Datamax 4406, 4212, 4604, 4308, 4208 manual Host Settings

Communications (continued)

HOST SETTINGS				Settings which affect all communications
				with a host.
	HOST TIMEOUT			The number of seconds a communications
	—10 SEC		(1-60)	port must be idle before the printer may
				process data from a different port. This
				value is also used to “timeout” an image /
				label format download.
	CONTROL CODES			Allows the operator to change the prefix of
				the software commands interpreted by the
				printer.
		—STANDARD CODES		Hex 01 = SOH command; Hex 02 = STX
				command; count-by = ^; Hex 1B = ESC;
				Hex 0x0D = Carriage Return
		ALTERNATE CODES		Hex 5E = SOH command; Hex 7E = STX
				command; count-by = @; Hex 1B = ESC;
				Hex 0x0D = Carriage Return
		ALTERNATE CODES 2		Hex 5E = SOH command; Hex 7E = STX
				command; count-by = @; Hex 1B = ESC;
				Hex 0x7C = Carriage Return
		ALTERNATE CODES 3		Hex 5E = SOH command; Hex 23 = STX
				command; count-by = @; Hex 1B = ESC;
				Hex 0x0D = Carriage Return
	FEEDBACK CHARACTERS			Returns a Hex 1E, [RS], after each label
				successfully prints, and a Hex 1F, [US],
				after each batch of labels is printed.
		ENABLED		Feedback characters are sent to the host.
		—DISABLED		No feedback characters are sent.
	ESC SEQUENCES			Allows data containing invalid ESC control
				code sequences to be processed.
		—ENABLED		Normal printer operating mode.
		DISABLED		ESC sequences are ignored and the data is
				processed. Bitmapped font downloads are
				disabled in this mode.

56 I-Class