Datamax 4308, 4212, 4406, 4604, 4208 manual Custom Adjustments

Print Control (continued)

CUSTOM ADJUSTMENTS			These factory adjustments independently
			change the listed parameters to finely tune the
			printer and compensate for slight mechanical
			differences sometimes evident if multiple
			printers share label formats. In addition, each
			of the following adjustments has no factory
			default setting and restoring factory defaults
			will not affect these settings.
	DARKNESS		Controls the printhead strobe time to fine-
	XX	(1-64)	tune the HEAT setting.
	ROW ADJUST		Shifts the vertical start of print position in
	XXX DOTS (-100 Æ 100)		dots upward or downward to fine-tune the
			ROW OFFSET setting; see Appendix C.
	COLUMN ADJUST		Shifts both the horizontal start of print
	XXX DOTS (0-128)		position and the LABEL WIDTH termination
			point to the right in dots to fine-tune the
			COLUMN OFFSET setting; see Appendix C.
	PRESENT ADJUST		Adjusts the label stopping position in dots to
	XXX DOTS (0-128)		fine-tune the PRESENT DISTANCE setting;
			see Appendix C.

38 I-Class