4.0.3Quick Test Mode: Print Test Labels
;Note: The Quick Test Mode functions are disabled while processing data from communications interfaces until the Host Timeout value expires.
n
The DOWN ARROW Key scrolls to the previous test function.
o
The UP ARROW Key scrolls to the next test function.
p
The ENTER Key will change the selected test label quantity of 2, 100, 1000, or 9999 (except the ‘Configuration Label’, quantity of one). Holding down the key scrolls quantities.
q
The ESCAPE Key will exit the Quick Test Mode without printing.
r
The TEST Key will print the selected test label at the selected quantity. During test label printing, this key also functions as a cancel key (the printer will prompt you for confirmation before cancellation occurs).
☞You can program a time delay between the printing of test labels using the ‘Print Test Rate’ feature; see Section 4.1.7.
| 31 |