4.1.7 | Diagnostics |
| ||
|
|
|
|
|
HEX DUMP MODE |
| Most commonly used for troubleshooting. | ||
|
|
|
| Prints data and instructions received from |
|
|
|
| the host rather than interpreting them as |
|
|
|
| label formats; see Section 6.2. |
| ENABLE |
| Prints raw ASCII data received from the | |
|
|
|
| host rather than executing the commands. |
| DISABLE |
| Executes and prints label formats (normal | |
|
|
|
| operating mode). |
|
|
|
| |
OPTIONS TESTING |
| Tests currently installed options | ||
|
|
|
| |
| TEST PRESENT SENSOR | Performs a functional test of the Present | ||
|
|
|
| Sensor circuitry. |
| TEST CUTTER |
| Performs a functional test of the optional | |
|
|
|
| cutter mechanism and circuitry. |
|
| PERFORM TEST | The cutter will cycle 1, 10 or 100 times | |
|
| 1 TIME |
| (selectable). The results of each attempt |
|
|
|
| will be displayed. |
| MONITOR GPIO INPUT |
| ||
|
|
| ||
| TEST GPIO OUTPUT |
| ||
|
|
|
| |
| TEST SCANNER |
| Performs a functional test of the Scanner. | |
|
|
|
|
|
|
| SCAN TEST |
| Enters “read once mode.” A bar code is |
|
|
|
| read and the decoded results are displayed. |
|
| ALIGNMENT TEST | Enters “constant read mode.” Bar codes | |
|
|
|
| are read; decoded results are displayed; |
|
|
|
| and, a |
|
|
| ||
PRINT TEST RATE | (min) | The number of minutes to delay between | ||
000 |
| the printing of batches of labels in Quick | ||
|
|
|
| Test Mode. |
58 |
|
