Datamax 4308, 4212, 4406, 4604, 4208 manual Die-cut stock strip, Value

Advanced Entry Calibration (continued)

Step	Operator Action		Displayed Message	Comment
11	Proceed according to			Where ‘yyy’ is a
			HBJO!USBO!!!!!=zzz?
	your media type:		+11!!!!!!!!)1!.!42*	numerical value
	Die-cut stock: strip the		Or, for reflective media:	representing the
				current sensor
	media from the backing
				reading: useful in
	and then reinsert it into
			HBJO!SFGM!!!!!=zzz?	locating the best
	the sensor; adjust the		+11!!!!!!!!)1!.!42*
				sensor position.
	Sensor Eye Mark over
	the center of the backing.
				; Note: Never
	Notched stock: adjust
				position the
	the Sensor Eye Mark			sensor over a
	over the center of the			perforation when
	notch.			recording a
	Reflective stock: Adjust			sensor reading.
	the Sensor Eye Mark
	over the center of the
	facedown black mark.
	Press the	Key
	to select the setting and
	then record the sensor
	reading in a table similar
	to the one shown after
	Step 12, as a TOF
	Value.
	Next, press the
	Key to increment the
	Gain Number.

Repeat for each of the

Gain Numbers (00-32).

;Note: Do NOT move the position of the Media Sensor after it has been adjusted.

I-Class 73