6.1Fault and Warning Messages
All printer functions are internally monitored. If a problem (Fault) or a potential problem (Warning) is detected, the Error Indicator (see Section 4.0.4) will be illuminated. A corresponding message will be displayed (if not within a branch of the menu system or in Quick Test Mode). These messages, along with possible solutions, are described below.
Fault Messages:
Fault Messages receive the highest display priority. If more than one fault is detected the display will cycle between messages.
;Note: To return to normal operation after the printer enters a fault condition, the fault must be corrected and then the FEED Key must be pressed to clear the condition.
Printer Fault Messages
|
| Displayed Message | Description | Possible Solution(s) |
|
|
|
| The printer has | Try cycling the printer power |
|
|
|
| |||
|
| 35W!PVU!PG!UPMFSBODF | detected a drop in | ‘Off’ and ‘On’. If the fault |
|
|
|
| the | does not clear, call for |
|
|
|
| supply. | service. |
|
|
|
|
|
|
|
|
|
| The printer has | Try cycling the printer power |
|
|
|
| |||
|
| BED!GBVMU | detected an analog | ‘Off’ and ‘On’. If the fault |
|
|
|
| to digital circuit | does not clear, call for |
|
|
|
| converter failure. | service. |
|
|
|
|
|
|
|
|
|
| The printer has |
|
|
|
|
| WARNING! Use extreme |
| |
|
| DVUUFS!GBVMU | detected a cutter | care. Turn ‘Off’ and unplug |
|
|
|
| mechanism fault. | the printer before proceeding. |
|
|
|
|
| Examine the cutter for |
|
|
|
|
| obstructions and ensure that |
|
|
|
|
| the cutter cable is properly |
|
|
|
|
| installed. |
|
|
|
|
| Plug in and turn ‘On’ the |
|
|
|
|
| printer. Press the FEED Key. |
|
|
|
|
| If the fault does not clear, call |
|
|
|
|
| for service. |
|
|
|
|
|
|
|
| 93 |
