Datamax 4308, 4212, 4406, 4604, 4208 manual Step Displayed Message Operator Action Comments

To save a manually entered setup (for example, an application that required an Advanced Entry Calibration before beginning) as a configuration file using the front panel:

Step	Displayed Message	Operator Action					Comment(s)
1							You are entering
	!
	SFBEZ	Press the		Key.			‘Menu Mode’.
2		Use the				Key	The	Key can
	NFOV!NPEF!
	NFEJB!TFUUJOH	to scroll to ‘System					also be used.
		Settings’.
3		Press the					You are entering the
	NFOV!NPEF
	TZTUFN!TFUUJOHT	Key to select ‘System					‘System Settings’
		Settings’.					menu.
4		Press the					You are entering the
	TZTUFN!TFUUJOHT!
	DPOGJHVSBUJPO!GJMF	Key to select					‘Configuration File’
		‘Configuration File’.					submenu.
5		Press the					The	Key can
	DPOGJHVSBUJPO!GJMF				‘Save
	SFTUPSF!BT!DVSSFOU	Key to scroll to					also be used.
		Setting As’.
6		Press the					Press the
	DPOGJHVSBUJPO!GJMF
	TBWF!TFUUJOH!BT	Key.					Key to exit this
							selection.
7		Enter a file name using					The	Key can
	TBWF!TFUUJOH!BT
	}	the	Key to				also be used.
		scroll through the
		characters.

;Note: To change an accepted character, select the delete function (solid flashing block) and press the ENTER Key.

8		Use the	Key	Continue entering the
	TBWF!TFUUJOH!BT!
	TQFDJBM!}	to accept the character.		file name in this
				manner (“SPECIAL
				STOCK” has been
				used as an example).

;Note: To abort the “save setting” function, delete all entered characters in the file name and press the ESCAPE Key.

9		Press the	Key	Save complete. (To
	TQFDJBM!TUPDL
	TVDDFTTGVM	repeatedly to save the		restore a saved file
		file name and return to		using the front panel
		‘Ready’.		see Section 4.1.5.)
128				I-Class