System Settings (continued)
;Note: As indicted, the following menu selections will only appear according to the model of your printer.
ALLEGRO EMULATION | This instructs the firmware to process | |
|
| specific DPL data as would the |
|
| Allegro® printer without all of the |
|
| variations. |
| ENABLED | The row position is calculated based |
|
| on 194 DPI. |
|
| Lines and boxes: Rotations 2 and 4 |
|
| are affected by the vertical multi- |
|
| plication factor defined in the DPL |
|
| Dxx command. |
|
| Column positions greater than the |
|
| printhead width are adjusted back to |
|
| the printable area and printed. |
| DISABLED | The above exception is disabled. |
|
|
|
DPI EMULATION | For users who want to print DPL files | |
|
| intended for a 203 DPI printer. |
| DISABLED | Label formats interpreted as intended |
|
| for 406 DPI. |
| 203 DOTS PER INCH | Label formats interpreted as intended |
|
| for 203 DPI. |
DPI EMULATION | For users who want to print DPL files | |
|
| intended for a 203 or 300 DPI printer. |
| DISABLED | Label formats interpreted as intended |
|
| for 600 DPI. |
| 300 DOTS PER INCH | Label formats interpreted as intended |
|
| for 300 DPI. |
| 203 DOTS PER INCH | Label formats interpreted as intended |
|
| for 203 DPI. |
| 49 |