Communications (continued)

GATEWAY

 

Specifies the network gateway address the

 

 

 

 

NIC Adapter should use.

 

 

SNMPTRAP DESTINATION

 

Selects the Network IP address where all

 

 

 

 

SNMP Traps will be sent. If zeroed, no

 

 

 

 

traps are sent.

 

 

 

 

PROTOCOL

 

The network protocols recognized by the

 

 

 

 

NIC Adapter.

 

 

 

 

 

NETWARE

 

Allow the printer to be driven from an NDS

 

 

 

 

Novell Print Queue.

 

 

 

 

 

—ENABLED

 

Netware is enabled by default.

 

 

 

 

 

 

 

 

 

 

DISABLED

 

Ignore the Netware protocol. Select this

 

 

 

 

option if Netware is not needed.

 

 

 

 

 

DISCOVERY

 

This is the address discovery method used

 

 

 

 

by the NIC Adapter if a static address is

 

 

 

 

not utilized. If no server for any of the

 

 

 

 

discovery methods is found, the static

 

 

 

 

value specified above is used.

 

 

 

 

 

 

 

 

 

 

 

 

; Note: For faster NIC Adapter boot times,

 

 

 

 

 

disable any discovery methods not used.

 

 

 

 

 

 

 

 

 

DHCP

 

Dynamic

Host

Control

Protocol.

 

 

 

 

Automatically assign IP address from a

 

 

 

 

DHCP Server.

 

 

 

 

 

—ENABLED

 

DHCP is enabled by default.

 

 

 

 

 

 

 

 

 

 

 

WARNING! An IP Address assigned by a DHCP

 

 

 

 

 

has precedence over any static IP Address

 

 

 

 

 

stored in the NIC Adapter.

 

 

 

 

 

 

 

 

 

 

 

 

DISABLED

 

Disable DHCP.

 

 

 

;Note: Select this option to insure any static IP stored is used by the NIC Adapter.

I-Class

55

Page 65
Image 65
Datamax 4212, 4406, 4604, 4308, 4208 manual Specifies the network gateway address