Printer Options (continued)
GPIO PORT | Model dependant option used to interface | ||
|
|
| the printer to an external controlling device |
|
|
| (see Appendix D). |
| GPIO DEVICE | Input control signal is required to print a | |
|
|
| label. |
|
| DISABLED | Disables the GPIO. |
|
|
|
|
|
| APPLICATOR | Enables the GPIO for a Label Applicator. |
|
|
|
|
|
| BARCODE VERIFIER | Enables the GPIO for the Barcode Verifier. |
|
|
|
|
| START OF PRINT | Programmable signal input controlling the | |
|
|
| Start of Print (SOP). |
|
| ACTIVE HIGH | Signal must go high at SOP. |
|
|
|
|
|
| ACTIVE LOW | Signal must go low at SOP. |
|
|
|
|
| END OF PRINT | Programmable signal output for End of Print | |
|
|
| (EOP). |
|
| LOW PULSE | Low pulse generated at EOP. |
|
|
|
|
|
| HIGH PULSE | High pulse generated at EOP. |
|
|
|
|
|
| ACTIVE LOW | Signal goes low at EOP. |
|
|
|
|
|
| ACTIVE HIGH | Signal goes high at EOP. |
|
|
|
|
42 |
|
