Datamax 4604, 4212, 4406, 4308, 4208 manual Print Control

4.1.3Print Control

☞Refer to Section 2.1.1 for detailed information on print quality controls.

HEAT		Controls the ‘burn-time’ of the printhead. This
—10 (0-30)		is the equivalent of Heat Setting on most label
		software programs.
PRINT SPEED		Controls the rate of label movement during
		the printing process; see Appendix C.
FEED SPEED		Controls the rate of label movement between
		printing areas; see Appendix C.
REVERSE SPEED		Controls the rate of label movement during
		backup positioning for start of print, cutting or
		present distance; see Appendix C.
ROW OFFSET		Shifts the vertical start of print position. This
—00.00in (0-99.99)		is the user setting for row adjustment.
COLUMN OFFSET		Shifts the horizontal, left-justified start of
—00.00 in	(0-99.99)	print position to the right without shifting the
		Label Width termination point to the right.
		This is the user setting for Column Adjust.
PRESENT DISTANCE		Sets the label stop position past the start of
—0.00 in	(0-4.00)	print. When the next label format is received,
		the printer will automatically backfeed to the
		start position. If a quantity of more than one
		label is printed without a present sensor
		enabled, or if the present distance is set to
		zero, the printer will operate without
		reversing.

I-Class 37