Uniden CXA 15698 manual Connecting the Cordless Handset and Charger

Page 16

Connecting the Cordless Handset and Charger

The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger.

1)Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

CAUTION: Use only the Uniden AD-310 or AD-1010 AC adapter.

2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.

3) Make sure that the charge light illuminates. If the charge light does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts.

4)Charge the handset battery pack for at least 15-20 hours before using your new cordless handset for the first time.

5)To test your connection, try making a call from the cordless handset. If your call does not connect, check to make sure the battery is fully charged. If you see LOW BATTERY on the cordless handset display, check to make sure the battery is properly connected. To check the battery, slide the battery compartment door open and check the battery cables to ensure a tight and proper connection. If your handset still does not work, please contact Uniden’s Customer Service department. Please see back cover for contact information.

15

Image 16

Contents Page Contents Using Your Answering Machine MaintenanceTroubleshooting PrecautionsAccessibility WelcomeTerminology Manual ConventionsAnswering Machine Features Main Phone FeaturesProduct Overview Controls and Functions Main Base UnitHandset ChargerUsing the Base Menus Using the InterfaceUsing the Handset Menus Installing the Phone Choosing the Best LocationConnecting the Base and Corded Handset Uniden AD-314 AC adapterTesting the Connection Changing the Dial Mode Mounting the Base Unit on a Wall Standard wall plate mountingDirect wall mounting Page Connecting the Cordless Handset and Charger Installing the Belt Clip Headset InstallationTo attach the belt clip To remove the belt clipSetting the Day and Time Base SetupSet Setting the Area Code Setting Caller ID on Call Waiting CidcwPress cid select Adjusting the Base Display LCD Contrast Handset SetupSetting AutoTalk Checking the Area Code Setting from the Handset Selecting a Language for the Handset DisplayUsing the Speed Dial Memory Storing a Name and Number in MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone During a Power FailureMaking and Receiving Calls Making a Call from Speed Dial Memory Easy dialingTo cancel speed dialing Making a Call from the Caller ID ListAdjusting the Ringer, and Earpiece and Speaker Volume Selecting the Cordless Handset Ring Tone and VolumeRedialing the Last Dialed Number Press redial/pauseSetting the Base Ringer Volume Muting the Ringer One Call Only Do Not Disturb DND All callsMute Base Microphone Using Call Waiting Selecting a Different ChannelFind Handset Placing a Call on Hold from the BaseConferencing Joining a Conference CallConference Press talk/flash on ExitingIntercom Making an IntercomTransferring a Call Answering and Hanging up an IntercomTone Dialing Switch-over If your telephone company requires pulse dialing, youCaller ID and Cidcw Caller ID on Call Waiting Caller ID on Call Waiting Cidcw Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Press delete/channel delete on the baseFeatures Integrated Answering MachineSetting the Record Time or Announce Only Setting Up Your Answering MachineSelecting a Language Setting the Number of Rings Activating Call ScreeningActivating the Message Alert Setting Your Outgoing Message Greeting To Record a personal outgoing message GreetingChoosing between the two outgoing messages Turning the Answering Machine On/Off Using Your Answering MachineReviewing Messages Playing MessagesRepeating MessageScreening a call Recording a ConversationAppears on the base display and recording is Voice Memo Base OnlyTerminated Remote Operation Turn on the Answering Machine Remotely Maintenance SpecificationsPower Failure Talk and Standby TimesPage Troubleshooting Cleaning the battery charging contactsCommon Issues Symptom SuggestionMonitors, fluorescent lights, and electrical appliances Call was answered before the second ring Liquid Damage Cordless Handset BasePrecautions Rechargeable Nickel-Cadmium Battery WarningImportant Safety Instructions FCC Wants You To KnowRadio Interference Terminal Equipment Cordless Telephone PrivacyRadio Equipment One Year Limited Warranty G, H IndexK, L X, Y, Z Memo Remote Operation Card Remote Operation Card Memory Location MemoTask Key At Uniden, we’ll take care of you