Uniden CXA 15698 manual Liquid Damage, Cordless Handset Base

Page 60

Liquid Damage

Moisture and liquid can damage your cordless phone.

•If the phone or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

•If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:

 

Cordless Handset

 

Base

1)

Remove the battery cover and leave it off for ventilation.

1)

Disconnect the AC adapter

2)

Disconnect the battery pack. Leave the battery cover off and the battery

 

from the base, cutting off

 

pack disconnected for at least three days.

 

electrical power.

3)

Once the handset is completely dry, reconnect the battery pack and the

2)

Disconnect the telephone cord

 

battery cover.

 

from the base.

4)

Recharge the handset’s battery pack for 15 to 20 hours before using.

3)

Let dry for at least three days.

IMPORTANT:

You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the cordless handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline. See back cover page for contact information.

59

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Page Contents Using Your Answering Machine MaintenanceTroubleshooting PrecautionsAccessibility WelcomeTerminology Manual ConventionsMain Phone Features Answering Machine FeaturesProduct Overview Controls and Functions Main Base UnitHandset ChargerUsing the Interface Using the Base MenusUsing the Handset Menus Installing the Phone Choosing the Best LocationConnecting the Base and Corded Handset Uniden AD-314 AC adapterTesting the Connection Changing the Dial ModeMounting the Base Unit on a Wall Standard wall plate mountingDirect wall mounting Page Connecting the Cordless Handset and Charger Installing the Belt Clip Headset InstallationTo attach the belt clip To remove the belt clipBase Setup Setting the Day and TimeSet Setting Caller ID on Call Waiting Cidcw Setting the Area CodePress cid select Handset Setup Adjusting the Base Display LCD ContrastSetting AutoTalk Checking the Area Code Setting from the Handset Selecting a Language for the Handset DisplayUsing the Speed Dial Memory Storing a Name and Number in MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone During a Power FailureMaking and Receiving Calls Making a Call from Speed Dial Memory Easy dialingTo cancel speed dialing Making a Call from the Caller ID ListAdjusting the Ringer, and Earpiece and Speaker Volume Selecting the Cordless Handset Ring Tone and VolumeRedialing the Last Dialed Number Press redial/pauseSetting the Base Ringer Volume Do Not Disturb DND All calls Muting the Ringer One Call OnlyMute Base Microphone Using Call Waiting Selecting a Different ChannelFind Handset Placing a Call on Hold from the BaseConferencing Joining a Conference CallConference Press talk/flash on ExitingIntercom Making an IntercomTransferring a Call Answering and Hanging up an IntercomTone Dialing Switch-over If your telephone company requires pulse dialing, youCaller ID and Cidcw Caller ID on Call Waiting Caller ID on Call Waiting Cidcw Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Press delete/channel delete on the baseFeatures Integrated Answering MachineSetting Up Your Answering Machine Setting the Record Time or Announce OnlySelecting a Language Setting the Number of Rings Activating Call ScreeningActivating the Message Alert Setting Your Outgoing Message Greeting To Record a personal outgoing message GreetingChoosing between the two outgoing messages Using Your Answering Machine Turning the Answering Machine On/OffReviewing Messages Playing MessagesRepeating MessageScreening a call Recording a ConversationVoice Memo Base Only Appears on the base display and recording isTerminated Remote Operation Turn on the Answering Machine Remotely Maintenance SpecificationsPower Failure Talk and Standby TimesPage Troubleshooting Cleaning the battery charging contactsCommon Issues Symptom SuggestionMonitors, fluorescent lights, and electrical appliances Call was answered before the second ring Liquid Damage Cordless Handset BasePrecautions Rechargeable Nickel-Cadmium Battery WarningImportant Safety Instructions FCC Wants You To KnowRadio Interference Cordless Telephone Privacy Terminal EquipmentRadio Equipment One Year Limited Warranty Index G, HK, L X, Y, Z Memo Remote Operation Card Remote Operation Card Memory Location MemoTask Key At Uniden, we’ll take care of you
Top Page Image Contents