Uniden CXA 15698 manual Call was answered before the second ring

Page 59

Symptom

Suggestion

 

• The call was answered before the second ring.

 

• The call was placed through a switchboard.

The Caller ID does not display.

• Charge the cordless handset.

 

• Your Caller ID service may not be active; contact your local telephone

 

service provider.

The answering machine does not

• Make sure the AC adapter is plugged into wall outlet.

work.

• Make sure the answering machine is turned on.

The answering machine does not

• Set the record time to either the one minute or four minute option.

record any messages.

• The memory may be full. Delete some or all of the saved messages.

 

• The incoming messages may be too long. Remind callers to leave a brief

Messages are incomplete.

message.

 

• The memory may be full. Delete some or all of the saved messages.

After a power failure, the outgoing

• Record your personal outgoing message again. The default message

message is deleted.

should remain.

No sound on the base speaker

• Adjust the speaker volume on the base unit.

during call monitoring or message

• Make sure the call screen feature is set to on.

playback.

 

Cannot access remote call-in

• Make sure you’re using the correct PIN code.

• Make sure that the touch-tone phone you’re using can transmit the tone for

features from another touch-tone

at least two seconds. If it cannot, you may have to use another phone to

phone.

access your messages.

 

58

Image 59
Contents Page Contents Precautions Using Your Answering MachineMaintenance TroubleshootingWelcome AccessibilityManual Conventions TerminologyProduct Overview Main Phone FeaturesAnswering Machine Features Main Base Unit Controls and FunctionsCharger HandsetUsing the Handset Menus Using the InterfaceUsing the Base Menus Choosing the Best Location Installing the PhoneUniden AD-314 AC adapter Connecting the Base and Corded HandsetChanging the Dial Mode Testing the ConnectionStandard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting Page Connecting the Cordless Handset and Charger To remove the belt clip Installing the Belt ClipHeadset Installation To attach the belt clipSet Base SetupSetting the Day and Time Press cid select Setting Caller ID on Call Waiting CidcwSetting the Area Code Setting AutoTalk Handset SetupAdjusting the Base Display LCD Contrast Selecting a Language for the Handset Display Checking the Area Code Setting from the HandsetStoring a Name and Number in Memory Using the Speed Dial MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory During a Power Failure Using Your PhoneMaking and Receiving Calls Easy dialing Making a Call from Speed Dial MemoryMaking a Call from the Caller ID List To cancel speed dialingPress redial/pause Adjusting the Ringer, and Earpiece and Speaker VolumeSelecting the Cordless Handset Ring Tone and Volume Redialing the Last Dialed NumberSetting the Base Ringer Volume Mute Base Microphone Do Not Disturb DND All callsMuting the Ringer One Call Only Selecting a Different Channel Using Call WaitingPlacing a Call on Hold from the Base Find HandsetExiting ConferencingJoining a Conference Call Conference Press talk/flash onMaking an Intercom IntercomAnswering and Hanging up an Intercom Transferring a CallIf your telephone company requires pulse dialing, you Tone Dialing Switch-overCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting CidcwPress delete/channel delete on the base Deleting Information from the Caller ID ListDeleting a Caller ID message Deleting all Caller ID names/numbersIntegrated Answering Machine FeaturesSelecting a Language Setting Up Your Answering MachineSetting the Record Time or Announce Only Activating Call Screening Setting the Number of RingsActivating the Message Alert To Record a personal outgoing message Greeting Setting Your Outgoing Message GreetingChoosing between the two outgoing messages Reviewing Messages Using Your Answering MachineTurning the Answering Machine On/Off Message PlayingMessages RepeatingRecording a Conversation Screening a callTerminated Voice Memo Base OnlyAppears on the base display and recording is Remote Operation Turn on the Answering Machine Remotely Specifications MaintenanceTalk and Standby Times Power FailurePage Symptom Suggestion TroubleshootingCleaning the battery charging contacts Common IssuesMonitors, fluorescent lights, and electrical appliances Call was answered before the second ring Cordless Handset Base Liquid DamageRechargeable Nickel-Cadmium Battery Warning PrecautionsFCC Wants You To Know Important Safety InstructionsRadio Interference Radio Equipment Cordless Telephone PrivacyTerminal Equipment One Year Limited Warranty K, L IndexG, H X, Y, Z Memo Remote Operation Card Memory Location Memo Remote Operation CardTask Key At Uniden, we’ll take care of you